* feat(router): integrate allowed_fails_policy into health check failures (#24988)
* feat(router): integrate allowed_fails_policy into health check failures
Health check failures now increment the same per-deployment failure
counters used by allowed_fails_policy, so users can control how many
health check failures of each error type are required before a
deployment enters cooldown.
- ahealth_check() preserves the original exception in its return dict
- run_with_timeout() returns a litellm.Timeout on health check timeout
- _perform_health_check() propagates exceptions to unhealthy endpoints
- _write_health_state_to_router_cache() calls _set_cooldown_deployments
for each unhealthy endpoint that has an exception
- When allowed_fails_policy is set, the binary health check filter is
bypassed so cooldown is the sole routing exclusion mechanism
- Safety net: if all deployments are in cooldown with
enable_health_check_routing=True, the cooldown filter is bypassed
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(router): add health_check_ignore_transient_errors flag
When enabled, health check failures with 429 (rate limit) or 408 (timeout)
status codes are skipped from the cooldown pipeline. These are transient
load issues, not broken deployments. Auth errors (401), 404, and 5xx errors
still increment counters and trigger cooldown as before.
Config (general_settings):
health_check_ignore_transient_errors: true
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(router): also exclude 429/408 from health state cache when ignore_transient_errors set
The previous fix only skipped cooldown counter increments. The health state
cache was still marking 429/408 endpoints as is_healthy=False, causing the
binary health check filter to exclude them from routing.
Now, when health_check_ignore_transient_errors=True, 429/408 endpoints are
also excluded from the unhealthy list passed to build_deployment_health_states(),
so the binary filter treats them as unaffected (not unhealthy).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* docs(router): add health check driven routing guide
New standalone page covering the full health check routing feature:
allowed_fails_policy integration, health_check_ignore_transient_errors,
architecture SVG, step-by-step setup, and gotchas (TTL, AllowedFails semantics).
Replaces the inline section in health.md with a link to the new page.
Added to the Routing & Load Balancing sidebar.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(health-check-routing): fix three CI failures
- Add "exception" to ILLEGAL_DISPLAY_PARAMS in health_check.py so the
exception object is stripped before the health endpoint serializes
results to JSON (fixes TypeError: 'URL' object is not iterable)
- Add allowed_fails_policy = None to FakeRouter stubs in
test_router_health_check_routing.py (fixes AttributeError)
- Add health_check_ignore_transient_errors to config_settings.md router
settings reference table (fixes documentation test)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* Fix litellm/tests/proxy_unit_tests/test_proxy_server.py
* fix(router): address greptile review comments
- Narrow cooldown safety-net bypass: only fires when allowed_fails_policy
is set (cooldown is health-check driven). Without a policy, cooldowns
are from real request failures and must not be bypassed.
- Restore cooldown deployments DEBUG log that was accidentally removed.
- Fix test_health TypeError: move exception extraction to a separate
exceptions_by_model_id dict returned alongside endpoints, so exception
objects never appear in the endpoint dicts that get JSON-serialized
by the /health response.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(health-check-routing): properly isolate exceptions from health response
Return exceptions_by_model_id as a separate third value from
_perform_health_check / perform_health_check so exception objects
(which contain non-JSON-serializable httpx URL types) never appear
in the endpoint dicts that get serialized by the /health response.
Callers updated: _health_endpoints.py, shared_health_check_manager.py,
proxy_server.py background loop. All use the exceptions dict only for
cooldown integration, not for display.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(shared-health-check): fix remaining 2-value return sites and update type annotation
* fix(health-check-routing): fix P0 cooldown integration never firing
The cooldown loop was reading endpoint.get("exception") which is always
None because exceptions are now returned via exceptions_by_model_id, not
stored in endpoint dicts. Fixed to use _exceptions.get(model_id).
Also fixes the transient-error filter to use _exceptions instead of
endpoint.get("exception"), and fixes all remaining 2-value return sites
in shared_health_check_manager.py. Tests updated to pass exceptions via
exceptions_by_model_id parameter instead of endpoint dicts.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(health-check-routing): fix P1 transient-error filter broken on cache hits
When SharedHealthCheckManager returns cached results, exceptions_by_model_id
is always {} so the transient-error filter defaulted to status 500 for all
endpoints, incorrectly marking 429/408 endpoints as unhealthy.
Fix: store integer exception_status on each unhealthy endpoint dict in
_perform_health_check. _get_endpoint_exception_status() uses the live
exception object when available (direct path) and falls back to the stored
integer (cache-hit path). The integer is JSON-serializable and survives
the shared cache round-trip.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(health-check-routing): gate cooldown loop behind allowed_fails_policy
Without the policy, cooldown is not the routing exclusion mechanism.
Firing _set_cooldown_deployments for all enable_health_check_routing users
was a backwards-incompatible change — 401s would immediately cooldown
deployments that the binary filter would have recovered on the next cycle.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* revert: undo allowed_fails_policy gate on cooldown loop
Cooldown integration via health checks is intentional for all
enable_health_check_routing users, not just those with allowed_fails_policy.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(docs+tests): fix health_check_ignore_transient_errors doc section and test coverage
- Move health_check_ignore_transient_errors from router_settings to
general_settings in config_settings.md (code reads it from general_settings)
- Remove duplicate enable_health_check_routing / health_check_staleness_threshold
entries that were incorrectly listed under router_settings
- Replace TestHealthCheckEndpointExceptionPropagation tests with ones that
exercise the real _perform_health_check code path via mocked ahealth_check,
verifying exceptions appear in exceptions_by_model_id and NOT in endpoint dicts
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(tests+docs): fix tuple unpacking and docs test failures
- Update test mocks that return (healthy, unhealthy) to return
(healthy, unhealthy, {}) to match the new 3-value signature
- Update test unpackings of perform_shared_health_check to use
healthy, unhealthy, _ = ...
- Add health_check_ignore_transient_errors to router_settings section
in config_settings.md (it is a Router constructor param, so the doc
test requires it there; it also lives in general_settings for proxy use)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* Fix CodeQL errors
* fix(tests): fix 2-value unpackings of _perform_health_check in test_health_check.py
* fix(tests): fix mock _perform_health_check returning 2-tuple instead of 3
* fix team routing
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: add distributed lock for key rotation job (#23364)
* fix: add distributed lock for key rotation job
* fix: address Greptile review feedback on key rotation lock (#23834)
* fix: address Greptile review feedback on key rotation lock
* fix req changes greptile
* feat(proxy): Optional on_error for guardrail pipeline (API / technical failures) (#24831)
* guardrails fallback
* docs
* docs: add LITELLM_KEY_ROTATION_LOCK_TTL_SECONDS to environment variables reference
* fix(mypy): accept Union[Dict, Any] in _get_deployment_order and use typed list to fix min() type error
* fix(mypy): use Optional[str] for api_base in PydanticAI provider to match superclass signature
---------
Co-authored-by: Sameer Kankute <sameer@berri.ai>
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Co-authored-by: Harshit Jain <48647625+Harshit28j@users.noreply.github.com>
Co-authored-by: Shivam Rawat <shivam@berri.ai>
Co-authored-by: yuneng-jiang <yuneng@berri.ai>
The router_code_coverage.py script only scans test files with "router" in the filename.
test_health_check_routing.py was invisible to this check, causing _async_filter_health_check_unhealthy_deployments
and _filter_health_check_unhealthy_deployments to appear untested.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Background health checks now feed deployment health state into the
router candidate-filtering pipeline. Unhealthy deployments are excluded
proactively instead of waiting for request failures to trigger cooldown.
Gated by `enable_health_check_routing: true` in general_settings.
Off by default — zero behavior change for existing users.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Enable deployment_affinity, responses_api_deployment_check, and session_affinity to be configured per model group via router_settings.model_group_affinity_config, falling back to global settings for unconfigured groups.
- Add model_group_affinity_config parameter to Router and DeploymentAffinityCheck
- Add _get_effective_flags helper to resolve flags per model group
- Update async_filter_deployments and async_pre_call_deployment_hook to use per-group config
- Add 4 comprehensive tests covering per-group config, fallback, and override scenarios
This allows fine-grained control of affinity behavior across model groups, e.g., enabling stickiness only for cross-provider deployments while leaving other groups free to load-balance.
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
The 4 integration tests were flaky in CI because the AsyncHTTPHandler.post
mock was bypassed when aiohttp transport is used. Mock at the higher
BaseLLMHTTPHandler.async_response_api_handler level instead, which
bypasses the HTTP layer entirely while still exercising router deployment
selection, pre-call checks, and response post-processing (item ID rewriting).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Tests failed intermittently in CI (-n 8 workers) because cached
AsyncHTTPHandler instances from other tests bypassed the class-level
mock on AsyncHTTPHandler.post, causing real requests to OpenAI with
mock API keys. Router retries (default 2) masked the root cause.
- Add autouse fixture to flush litellm.in_memory_llm_clients_cache
before/after each test so mocks always apply to fresh clients
- Set num_retries=0 on all Router instances to surface mock failures
immediately instead of silently retrying
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* test(test_router.py): initial unit test confirming router.afile_content uses dynamic api key / api base
* fix(managed_files.py): filter deployments for only those within file id mapping
ensure call works - only route to models where the file was written
* fix(proxy_server.py): fix loading in model ids from config, if config id is int
* fix(router.py): return all model file id mappings on create_file
if multiple deployments - this ensures all the file id mappings are bubbled up
Fixes issue when trying to use loadbalanced deployments - only 1 file id mapping was being stored
* feat(router_utils/common_utils.py): filter models by team id when selecting for routing
Prevents team only models from being used by other teams
* fix(common_utils.py): additional fixes around filtering team-based models
* fix(batches_endpoints/endpoints): support list batches with target model names specified
* fix(common_utils.py): more testing for team deployment filters
